Renesas Emulation Pod M30100T3-RPD-E Bedienungsanleitung Seite 43
- Seite / 52
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
( 43 / 52 )
6.2 When the Emulator Debugger Does Not Start Up Properly
(1) When the LED Display of PC4701 is Abnormal
Table 6.1 LED's abnormal display and its checkpoints
Error
Connection to
the target system
Checkpoint
LEDs do not light up.
All LEDs remain lit.
The POWER LED of
"STATUS OF TARGET"
does not light up.
The CLOCK LED of
"STATUS OF TARGET"
does not light up.
The RESET LED of
"STATUS OF TARGET"
does not go out.
-
-
Connected
Disconnected
Connected
Connected
Recheck that the power cable is connected to the
PC4701.
See the PC4701 User's Manual.
(1) Recheck that the connection between the
PC4701 and this product.
See "3.4 Connecting the PC4701 and
Emulation Pod" (page 27).
(2) Recheck that the connection between the
PC4701 and the M30100T3-RPD-E.
See "3.5 Connecting the Pod Probe (page 29).
Check that power is properly supplied to the target
system and that the target system is properly
grounded.
(1) Check that both the main and sub clocks of the
emulator debugger are not set to "EXT".
See the CLK command of the emulator
debugger.
(2) Check that the oscillation circuit in the
M30100T3-RPD-E is oscillating.
See "3.2 Selecting Clock Supply and Replacing
Oscillator Circuit Boards (page 23).
(1) Check that the oscillation circuit in the target
system is oscillating properly.
(2) Check that the switches of the pod probe
interface board are correctly set.
See the user's manual of pod probe.
Check that the reset pin of the target system is
pulled up.
- M30100T3-RPD-E 1
- ( 2 / 52 ) 2
- To use the product properly 3
- When using outside Japan 3
- Contents 4
- ( 5 / 52 ) 5
- Terminology 6
- ( 7 / 52 ) 7
- WARNING 8
- CAUTION 8
- Warning for Installation: 9
- Warnings for Use Environment: 9
- IMPORTANT 10
- Chapter 2. Preparation 15
- 2.3 Name of Each Part 17
- (1) Making the MCU File 18
- (2) Setting the Work Area 18
- (3) Downloading Firmware 19
- (4) Self-check 19
- ( 20 / 52 ) 20
- Chapter 3. Setting Up 21
- ( 24 / 52 ) 24
- ( 25 / 52 ) 25
- Note on Connecting the Cable: 27
- Note on Securing the Screws: 27
- Note on Setting Switches: 27
- 3.5 Connecting the Pod Probe 29
- ( 30 / 52 ) 30
- Chapter 4. Usage 31
- ( 36 / 52 ) 36
- Chapter 5. Specifications 37
- 5.2 External Dimensions 39
- ( 40 / 52 ) 40
- Chapter 6. Troubleshooting 41
- ( 46 / 52 ) 46
- ( 47 / 52 ) 47
- 7.1 Maintenance 48
- 7.2 Guarantee 48
- 7.3 Repair Provisions 48
- 7.4 How to Request for Repair 49
- ( 50 / 52 ) 50
- Rev.1.00 51
- March 1, 2004 51
- REJ10J0426-0100Z 51
Verwandte Produkte und Handbücher für Hardware Renesas Emulation Pod M30100T3-RPD-E
Hardware Renesas TQFP-100G Bedienungsanleitung
(22 Seiten)
(22 Seiten)
Hardware Renesas TFP-100B Bedienungsanleitung
(22 Seiten)
(22 Seiten)
Hardware Renesas R8C/2D Bedienungsanleitung
(6 Seiten)
(6 Seiten)
Hardware Renesas HS2378KCI01H Bedienungsanleitung
(170 Seiten)
(170 Seiten)
Hardware Renesas TFP-120 Bedienungsanleitung
(21 Seiten)
(21 Seiten)
Hardware Renesas QFP-64A Bedienungsanleitung
(19 Seiten)
(19 Seiten)
Hardware Renesas FP-144 Bedienungsanleitung
(20 Seiten)
(20 Seiten)
Electrolux 8190 D 8260 manuals
Owner’s manuals and user’s guides for Unknown Electrolux 8190 D 8260.
We providing 1 pdf manuals Electrolux 8190 D 8260 for download free by document types: User Manual
Kommentare zu diesen Handbüchern